Monday, September 30, 2013
Thursday, September 26, 2013
this is a message from controller of examination
Dear Colleagues
For all the students admitted in the year 2013, the examination application forms were made available through online for all the programmes under the Faculty of engineering and Technology and Science and Humanities. Many students pay their examination fees through online and they do not submit their signed hard copy of the application form. The printed examination application form (duly signed by the student and Head of the Department / Institution) along with the Online Fee paid receipt should be submitted to the concerned college office without fail.
If the printed examination application form is not submitted by the Student before the due date, they will not be permitted to appear for the End semester Examinations. Examination application forms will not be accepted on any account after the last date even if the payment is made before the last date.Kindly bring it to the notice of all concerned.
For all the students admitted in the year 2013, the examination application forms were made available through online for all the programmes under the Faculty of engineering and Technology and Science and Humanities. Many students pay their examination fees through online and they do not submit their signed hard copy of the application form. The printed examination application form (duly signed by the student and Head of the Department / Institution) along with the Online Fee paid receipt should be submitted to the concerned college office without fail.
If the printed examination application form is not submitted by the Student before the due date, they will not be permitted to appear for the End semester Examinations. Examination application forms will not be accepted on any account after the last date even if the payment is made before the last date.Kindly bring it to the notice of all concerned.
Thanks
With Regards
Dr. S. Ponnusamy, Ph. D
Controller of Examinations
SRM University, SRM Nagar, Potheri
Kattankulathur - 603 203
Tamilnadu, India.
With Regards
Dr. S. Ponnusamy, Ph. D
Controller of Examinations
SRM University, SRM Nagar, Potheri
Kattankulathur - 603 203
Tamilnadu, India.
Wednesday, September 25, 2013
Model Examinations - Schedule
Faculty of Engineering and Technology
B.Tech – Ist year - Model Examinations - Schedule
11.11.2013 Monday |
2.00 pm to 5.00 pm | Basic Electrical Engineering |
12.11.2013 Tuesday |
2.00 pm to 5.00 pm | English/Value Education |
13.11.2013 Wednesday |
2.00 pm to 5.00 pm | Basic Electronics Engineering |
15.11.2013 Friday |
2.00 pm to 5.00 pm | Physics |
18.11.2013 Monday |
2.00 pm to 5.00 pm | Mathematics |
19.11.2013 Tuesday |
2.00 pm to 5.00 pm | Basic Civil Engineering/Biology for Engineers/ Elements of Aeronautics (AE) |
20.11.2013 Wednesday | 2.00 pm to 5.00 pm | Chemistry/Principles of Environmental Science |
21.11.2013 Thursday |
2.00 pm to 5.00 pm | Basic Mechanical Engineering |
Dr.K.Anbazhagan
Prof.& Head, Dept of EFL
Test – Coordinator
Wednesday, September 18, 2013
Friday, September 13, 2013
Thursday, September 5, 2013
Ms DOS Commands
Learning MS-DOS Basics - A Tutorial
This tutorial gives you an opportunity to try basic MS-DOS commands. By following the
procedures in this section, you will learn to:
o View the contents of a directory
o Change from one directory to another
o Create and delete directories
o Change from one drive to another
o Copy files
o Rename files
o Delete files
o Format a floppy disk
The Command Prompt
When you first turn on your computer, you will see some cryptic information flash by.
MS-DOS displays this information to let you know how it is configuring your computer.
You can ignore it for now. When the information stops scrolling past, you'll see the
following:
C:\>
This is called the command prompt or DOS prompt. The flashing underscore next to
the command prompt is called the cursor. The cursor shows where the command you
type will appear.
Typing a Command
This section explains how to type a command at the command prompt and demonstrates
the "Bad command or file name" message.
• To type a command at the command prompt
1. Type the following at the command prompt (you can type the command in either
uppercase or lowercase letters ):
nul
If you make a typing mistake, press the BACKSPACE key to erase the mistake, and
then try again.
2. Press ENTER.
You must press ENTER after every command you type.
The following message appears:
Bad command or file name
The "Bad command or file name" message appears when you type something that MSDOS
does not recognize. Because nul is not a valid MS-DOS command, MS-DOS
displays the "Bad command or file name" message.
3. Now, type the following command at the command prompt:
ver
The following message appears on your screen:
MS-DOS version 6.22
Viewing the Contents of a Directory
In this section, you will view the contents of a directory by using the dir command. The
dir command stands for "directory."
• To view the contents of a directory
1. Type the following at the command prompt:
dir
A list similar to the following appears:
Volume in drive C is MS-DOS_6.22
Volume Serial Number is lE49-15E2
Directory of C:\
WINDOWS <DIR> 09-08-92 10:27p
TEMP <DIR> 05-15-92 12:09p
CONFIG SYS 278 09-23-92 10:50a
COMMAND COM 53014 09-18-92 6:00a
WINA20 386 9349 11-11-91 5:00a
DOS <DIR> 09-02-92 4:23p
AUTOEXEC BAT 290 09-23-92 10:54a
7 file(s) 62931 bytes
8732672 bytes free
This is called a directory list. A directory list is a list of all the files and
subdirectories that a directory contains. In this case, you see all the files and
directories in the main or root directory of your drive. All the files and
directories on your drive are stored in the root directory.
Changing Directories
Look at the list on your screen. All the names that have <DIR> beside them are
directories. You can see a list of the files in another directory by changing to that
directory, and then using the dir command again. In this case, you will change
to the DOS directory.
Before you begin this section, make sure you have a directory named DOS by
carrying out the following procedure.
o To make sure you have a directory named Windows
1.If you do not see a line in the directory list indicating that you have a directory
named Windows, type the following at the command prompt:
dir /s Windows
You will see a message that includes a line such as the following:
Directory of C:\DIRNAME
o To change from the root directory to the WINDOWS directory
To change directories, you will use the cd command. The cd command stands for
"change directory."
1. Type the following at the command prompt:
cd windows
The command prompt changes. It should now look like the following:
C:\WINDOWS>
Next, you will use the dir command to view a list of the files in the DOS directory.
o To view a list of the files in the WINDOWS directory
1. Type the following at the command prompt:
dir
A list of the files in the WINDOWS directory appears, but scrolls by too quickly to read.
You can modify the dir command so that it displays only one screen of information at a
time.
o To view the contents of a directory one screen at a time
1. Type the following at the command prompt:
dir /p
One screen of information appears. At the bottom of the screen, you will see the
following message:
Press any key to continue . . .
2. To view the next screen of information, press any key on your keyboard.
Repeat this step until the command prompt appears at the bottom of your screen.
When you typed the dir command this time, you included the /p switch after the
command. A switch modifies the way MS-DOS carries out a command. Generally, a
switch consists of a forward slash (/) that is followed by one or more letters or numbers.
When you used the /p switch with the dir command, you specified that MS-DOS should
pause after it displays each screen of directory list information. The p actually stands for
"page"
Another helpful switch you can use with the dir command is the /w switch. The /w
switch indicates that MS-DOS should show a wide version of the directory list.
o To view the contents of a directory in wide format
1. Type the following at the command prompt:
dir /w
The directory list appears, with the filenames listed in wide format. Note that only
filenames are listed. No information about the files' size or date and time of creation
appears.
2. If the directory contains more files than will fit on one screen, you can combine the /p
and /w switches as follows:
dir /w /p
Changing Back to the Root Directory
Next, you will change from the DOS directory to the root directory. The root
directory is the directory you were in before you changed to the DOS directory.
Before you begin this section, make sure your command prompt looks like the
following:
C:\DOS>
o To change to the root directory
1. Type the following at the command prompt:
cd \
Note that the slash you type in this command is a backslash (\), not a forward
slash (/).
No matter which directory you are in, this command always returns you to the
root directory of a drive. The root directory does not have a name. It is simply
referred to by a backslash (\).
The command prompt should now look like the following:
C:\>
When your command prompt appears similar to this---that is, when it does not
contain the name of a directory---you are in the root directory.
Creating a Directory
In this section, you will create two directories. Creating a directory is helpful if
you want to organize related files into groups to make them easy to find. Before
you begin this section, make sure the command prompt looks like the following:
C:\>
To create a directory, you will use the md command. The md command stands
for "make directory."
o To create and change to a directory named FRUIT
1. Type the following at the command prompt:
md fruit
You have now creat ed a directory named FRUIT. You won't see the new FRUIT
directory until you carry out the dir command in the next step.
2. To confirm that you successfully created the FRUIT directory, type the
following at the command prompt:
dir
or
dir /p
Look through the directory list. A new entry somewhere in the list should look
similar to the following:
FRUIT <DIR> 09-25-93 12:09p
3. To change to the new FRUIT directory, type the following at the command
prompt:
cd fruit
The command prompt should now look like the following:
C:\FRUIT>
You will now create a directory within the FRUIT directory, named GRAPES.
o To create and work with a directory named GRAPES
1. Type the following at the command prompt:
md grapes
You will not see the new GRAPES directory until you carry out the dir command in the
next step.
2. To confirm that you successfully created the GRAPES directory, type the following at the
command prompt:
dir
A list similar to the following appears:
Volume in drive C is MS-DOS-6
Volume Serial Number is lE49-15E2
Directory of C:\FRUIT
. <DIR> 09-25-93 12:08p
.. <DIR> 09-25-93 12:08p
GRAPES <DIR> 09-25-93 12:10p
3 file(s) 0 bytes
11534336 bytes free
Note that there are three entries in the FRUIT directory. One is the GRAPES directory
that you just created. There are two other entries---one looks like a single period (.) and
the other looks like a double period (..). These directory entries are important to MSDOS,
but you can ignore them. They appear in every directory and cont ain information
relation to the directory structure.
The GRAPES directory is a subdirectory of the FRUIT directory. A subdirectory is a
directory within another directory. Subdirectories are useful if you want to further
subdivide information.
3. To change to the GRAPES directory, type the following at the command prompt:
cd grapes
The command prompt should now look like the following:
C:\FRUIT\GRAPES>
4. To switch back to the FRUIT directory, type the following:
cd ..
The command prompt should now look like the following:
C:\FRUIT>
When the cd command is followed by two periods (..), MS-DOS moves up one
level in the directory structure. In this case, you moved up one level from the
GRAPES directory to the FRUIT directory.
Deleting a Directory
If you no longer use a particular directory, you may want to delete it to simplify
your directory structure. Deleting a directory is also useful if you type the wrong
name when you are creating a directory and you want to delete the incorrect
directory before creating a new one.
In this section, you will delete the GRAPES directory. Before you begin this
section, make sure the command prompt looks like the following:
C:\FRUIT>
To delete a directory, use the rd command. The rd command stands for "remove
directory."
o To delete the GRAPES directory
1. Type the following at the command prompt:
rd grapes
2. To confirm that you successfully deleted the GRAPES directory, type the following at the
command prompt:
dir
The GRAPES directory should no longer appear in the directory list.
Note You cannot delete a directory if you are in it. Before you can delete a
directory, you must make the directory that is one level higher the current
directory. To do this, type cd.. at the command prompt.
Changing Drives
This section describes how to change drives. Changing drives is useful if you
want to work with files that are on a different drive.
So far, you have been working with drive C. You have other drives you can use
to store information. For example, drive A is your first floppy disk drive. The
files and directories on drive A are located on the floppy disk in the drive. (You
might also have a drive B, which contains the files and directories stored on the
floppy disk in that drive.)
Before you begin this section, make sure your command prompt looks like the
following:
C:\FRUIT>
o To change to and view files on a different drive
1. Insert a 3.5" floppy disk in drive A label- side up. Make sure the disk clicks
into the drive.
1. Type the following at the command prompt:
a:
Note that the command prompt changed to the following:
A:\>
This message may appear:
Not ready reading drive A
Abort, Retry, Fail?
If you see this message, the disk may not be inserted properly. Place the disk label-side
up in the disk drive, and make sure the disk clicks into the disk drive. Then, type r for
Retry. If this message appears again, press F for Fail, and then type b: at the command
prompt. If you no longer see this message, type b: instead of a: throughout the rest of the
tutorial.
There must be a floppy disk in the drive that you want to change to.
2. Change back to drive C by typing the following at the command prompt:
c:
Your command prompt should return to the following:
C:\FRUIT>
When you type a drive letter followed by a colon, you change to that drive. The drive
letter that appears in the command prompt shows which drive is the current drive. Unless
you specify otherwise, any commands you type are carried out on the current drive and in
the current directory.
So far, all the commands you typed were carried out on the current drive and in the
current directory. You can also carry out a command on a drive that isn't current. For
example, you can view the files on a disk in drive A without switching to drive A by
following this procedure.
o To view the contents of the WINDOWS directory on drive C
1. Type the following at the command prompt:
dir c:\windows
A list of the files in the DOS directory on drive C should scroll past on your screen.
Copying Files
This section describes how to copy a single file and a group of files. Copying files creates
a duplicate of the original file and does not remove the original file. This is useful for
many reasons. For example, if you want to work on a document at home, you can copy it
from your computer at work to a floppy disk and then take the floppy disk home.
To copy a file, you will use the copy command. When you use the copy command, you
must include two parameters. The first is the location and name of the file you want to
copy, or the source. The second is the location to which you want to copy the file, or the
destination. You separate the source and destination with a space. The copy command
follows this pattern:
copy source destination
• Copying a Single File
In this section, you will copy the notepad.exe files from the WINDOWS directory to the FRUIT
directory. You will specify the source and destination of these files in two different ways. The
difference between the two methods is explained at the end of this section.
Before you begin this section, make sure the command prompt looks like the following:
C:\FRUIT>
To copy the NOTEPAD.EXE files from the WINDOWS directory to the FRUIT directory
1. Return to the root directory by typing the following at the command prompt:
cd\
The command prompt should now look like the following:
C:\>
Change to the DOS directory by typing the following at the command prompt:
cd windows
The command prompt should now look like the following:
C:\WINDOWS>
2. Make sure the file you are going to copy, NOTEPAD.EXE, is located in the WINDOWS directory
by using the dir command followed by a filename.
dir notepad.exe
A list similar to the following appears:
3. To copy the NOTEPAD.EXE file from the WINDOWS directory to the FRUIT directory, type the
following at the command prompt:
copy c:\windows\notepad.exe c:\fruit
The following message appears:
1 file(s) copied
4. To confirm that you copied the files successfully, view the contents of the FRUIT directory by
typing the following at the command prompt:
dir \fruit
You should see the file listed in the FRUIT directory.
Renaming Files
This section explains how to rename files. You may want to rename a file if the information in it changes or
if you decide you prefer another name.
To rename a file, you will use the ren command. The ren command stands for "rename." When you use
the ren command, you must include two parameters.
The first is the file you want to rename, and the second is the new name for the file. You separate the two
names with a space. The ren command follows this pattern:
ren oldname newname
• Renaming a File
In this section, you will rename the README.TXT file.
Before you begin this section, make sure your command prompt looks like the following:
C:\FRUIT>
1. To rename the NOTEPAD.EXE file to PADNOTE.TXT, type the following at the command
prompt:
ren notpad.exe padnote.txt
2. To confirm that you renamed the file successfully, type the following at the command prompt:
dir
Deleting Files
This section explains how to delete, or remove, a file that you no longer want on your disk. If you don’t
have very much disk space, deleting files you no longer use is essential.
To delete a file, you will use the del command. The del command stands for "delete."
• Deleting a File
In this section, you will delete two files using the del command.
Before you begin, make sure your command prompt looks like the following:
C:\FRUIT>
To delete the PEARCOM and PEAR.HLP files
1. Delete the PADNOTE.TXT file by typing the following at the command prompt:
del PADNOTE.TXT
2. To confirm that you deleted the files successfully, type the following at the command prompt:
dir
• Deleting a Group of Files
In this section, you will use wildcards to delete a group of files.
Before you begin this section, make sure your command prompt looks like the following:
C:\FRUIT>
To delete files in the current directory that end with the extension OLD by using wildcards
1. View all files that end with the extension OLD by typing the following at the command prompt:
dir *.old
A list of all the files that end with the extension OLD appears. Make sure that these are the files
you want to delete. When you are deleting files by using wildcards, this step is very important. It
will prevent you from deleting files accidentally.
2. Delete all files ending with OLD by typing the following at the command prompt:
del *.old
3. To confirm that all the files with the extension OLD have been deleted, type the following at the
command prompt:
dir
The FRUIT directory should contain no files.
Now that the FRUIT directory is empty, you can delete it by using the rd (remove directory) command that
you learned to use in "Deleting a Directory" earlier in this chapter.
• To delete the FRUIT directory
1. Return to the root directory by typing the following at the command prompt:
cd \
2. You can see the FRUIT directory in the directory list by typing the following at the command
prompt:
dir or dir /p
3. Remove the FRUIT directory by typing the following at the command prompt:
rd fruit
4. To verify that the FRUIT directory has been removed, type the following at the command prompt:
dir or dir /p
The FRUIT directory should not appear in the directory list.
This tutorial gives you an opportunity to try basic MS-DOS commands. By following the
procedures in this section, you will learn to:
o View the contents of a directory
o Change from one directory to another
o Create and delete directories
o Change from one drive to another
o Copy files
o Rename files
o Delete files
o Format a floppy disk
The Command Prompt
When you first turn on your computer, you will see some cryptic information flash by.
MS-DOS displays this information to let you know how it is configuring your computer.
You can ignore it for now. When the information stops scrolling past, you'll see the
following:
C:\>
This is called the command prompt or DOS prompt. The flashing underscore next to
the command prompt is called the cursor. The cursor shows where the command you
type will appear.
Typing a Command
This section explains how to type a command at the command prompt and demonstrates
the "Bad command or file name" message.
• To type a command at the command prompt
1. Type the following at the command prompt (you can type the command in either
uppercase or lowercase letters ):
nul
If you make a typing mistake, press the BACKSPACE key to erase the mistake, and
then try again.
2. Press ENTER.
You must press ENTER after every command you type.
The following message appears:
Bad command or file name
The "Bad command or file name" message appears when you type something that MSDOS
does not recognize. Because nul is not a valid MS-DOS command, MS-DOS
displays the "Bad command or file name" message.
3. Now, type the following command at the command prompt:
ver
The following message appears on your screen:
MS-DOS version 6.22
Viewing the Contents of a Directory
In this section, you will view the contents of a directory by using the dir command. The
dir command stands for "directory."
• To view the contents of a directory
1. Type the following at the command prompt:
dir
A list similar to the following appears:
Volume in drive C is MS-DOS_6.22
Volume Serial Number is lE49-15E2
Directory of C:\
WINDOWS <DIR> 09-08-92 10:27p
TEMP <DIR> 05-15-92 12:09p
CONFIG SYS 278 09-23-92 10:50a
COMMAND COM 53014 09-18-92 6:00a
WINA20 386 9349 11-11-91 5:00a
DOS <DIR> 09-02-92 4:23p
AUTOEXEC BAT 290 09-23-92 10:54a
7 file(s) 62931 bytes
8732672 bytes free
This is called a directory list. A directory list is a list of all the files and
subdirectories that a directory contains. In this case, you see all the files and
directories in the main or root directory of your drive. All the files and
directories on your drive are stored in the root directory.
Changing Directories
Look at the list on your screen. All the names that have <DIR> beside them are
directories. You can see a list of the files in another directory by changing to that
directory, and then using the dir command again. In this case, you will change
to the DOS directory.
Before you begin this section, make sure you have a directory named DOS by
carrying out the following procedure.
o To make sure you have a directory named Windows
1.If you do not see a line in the directory list indicating that you have a directory
named Windows, type the following at the command prompt:
dir /s Windows
You will see a message that includes a line such as the following:
Directory of C:\DIRNAME
o To change from the root directory to the WINDOWS directory
To change directories, you will use the cd command. The cd command stands for
"change directory."
1. Type the following at the command prompt:
cd windows
The command prompt changes. It should now look like the following:
C:\WINDOWS>
Next, you will use the dir command to view a list of the files in the DOS directory.
o To view a list of the files in the WINDOWS directory
1. Type the following at the command prompt:
dir
A list of the files in the WINDOWS directory appears, but scrolls by too quickly to read.
You can modify the dir command so that it displays only one screen of information at a
time.
o To view the contents of a directory one screen at a time
1. Type the following at the command prompt:
dir /p
One screen of information appears. At the bottom of the screen, you will see the
following message:
Press any key to continue . . .
2. To view the next screen of information, press any key on your keyboard.
Repeat this step until the command prompt appears at the bottom of your screen.
When you typed the dir command this time, you included the /p switch after the
command. A switch modifies the way MS-DOS carries out a command. Generally, a
switch consists of a forward slash (/) that is followed by one or more letters or numbers.
When you used the /p switch with the dir command, you specified that MS-DOS should
pause after it displays each screen of directory list information. The p actually stands for
"page"
Another helpful switch you can use with the dir command is the /w switch. The /w
switch indicates that MS-DOS should show a wide version of the directory list.
o To view the contents of a directory in wide format
1. Type the following at the command prompt:
dir /w
The directory list appears, with the filenames listed in wide format. Note that only
filenames are listed. No information about the files' size or date and time of creation
appears.
2. If the directory contains more files than will fit on one screen, you can combine the /p
and /w switches as follows:
dir /w /p
Changing Back to the Root Directory
Next, you will change from the DOS directory to the root directory. The root
directory is the directory you were in before you changed to the DOS directory.
Before you begin this section, make sure your command prompt looks like the
following:
C:\DOS>
o To change to the root directory
1. Type the following at the command prompt:
cd \
Note that the slash you type in this command is a backslash (\), not a forward
slash (/).
No matter which directory you are in, this command always returns you to the
root directory of a drive. The root directory does not have a name. It is simply
referred to by a backslash (\).
The command prompt should now look like the following:
C:\>
When your command prompt appears similar to this---that is, when it does not
contain the name of a directory---you are in the root directory.
Creating a Directory
In this section, you will create two directories. Creating a directory is helpful if
you want to organize related files into groups to make them easy to find. Before
you begin this section, make sure the command prompt looks like the following:
C:\>
To create a directory, you will use the md command. The md command stands
for "make directory."
o To create and change to a directory named FRUIT
1. Type the following at the command prompt:
md fruit
You have now creat ed a directory named FRUIT. You won't see the new FRUIT
directory until you carry out the dir command in the next step.
2. To confirm that you successfully created the FRUIT directory, type the
following at the command prompt:
dir
or
dir /p
Look through the directory list. A new entry somewhere in the list should look
similar to the following:
FRUIT <DIR> 09-25-93 12:09p
3. To change to the new FRUIT directory, type the following at the command
prompt:
cd fruit
The command prompt should now look like the following:
C:\FRUIT>
You will now create a directory within the FRUIT directory, named GRAPES.
o To create and work with a directory named GRAPES
1. Type the following at the command prompt:
md grapes
You will not see the new GRAPES directory until you carry out the dir command in the
next step.
2. To confirm that you successfully created the GRAPES directory, type the following at the
command prompt:
dir
A list similar to the following appears:
Volume in drive C is MS-DOS-6
Volume Serial Number is lE49-15E2
Directory of C:\FRUIT
. <DIR> 09-25-93 12:08p
.. <DIR> 09-25-93 12:08p
GRAPES <DIR> 09-25-93 12:10p
3 file(s) 0 bytes
11534336 bytes free
Note that there are three entries in the FRUIT directory. One is the GRAPES directory
that you just created. There are two other entries---one looks like a single period (.) and
the other looks like a double period (..). These directory entries are important to MSDOS,
but you can ignore them. They appear in every directory and cont ain information
relation to the directory structure.
The GRAPES directory is a subdirectory of the FRUIT directory. A subdirectory is a
directory within another directory. Subdirectories are useful if you want to further
subdivide information.
3. To change to the GRAPES directory, type the following at the command prompt:
cd grapes
The command prompt should now look like the following:
C:\FRUIT\GRAPES>
4. To switch back to the FRUIT directory, type the following:
cd ..
The command prompt should now look like the following:
C:\FRUIT>
When the cd command is followed by two periods (..), MS-DOS moves up one
level in the directory structure. In this case, you moved up one level from the
GRAPES directory to the FRUIT directory.
Deleting a Directory
If you no longer use a particular directory, you may want to delete it to simplify
your directory structure. Deleting a directory is also useful if you type the wrong
name when you are creating a directory and you want to delete the incorrect
directory before creating a new one.
In this section, you will delete the GRAPES directory. Before you begin this
section, make sure the command prompt looks like the following:
C:\FRUIT>
To delete a directory, use the rd command. The rd command stands for "remove
directory."
o To delete the GRAPES directory
1. Type the following at the command prompt:
rd grapes
2. To confirm that you successfully deleted the GRAPES directory, type the following at the
command prompt:
dir
The GRAPES directory should no longer appear in the directory list.
Note You cannot delete a directory if you are in it. Before you can delete a
directory, you must make the directory that is one level higher the current
directory. To do this, type cd.. at the command prompt.
Changing Drives
This section describes how to change drives. Changing drives is useful if you
want to work with files that are on a different drive.
So far, you have been working with drive C. You have other drives you can use
to store information. For example, drive A is your first floppy disk drive. The
files and directories on drive A are located on the floppy disk in the drive. (You
might also have a drive B, which contains the files and directories stored on the
floppy disk in that drive.)
Before you begin this section, make sure your command prompt looks like the
following:
C:\FRUIT>
o To change to and view files on a different drive
1. Insert a 3.5" floppy disk in drive A label- side up. Make sure the disk clicks
into the drive.
1. Type the following at the command prompt:
a:
Note that the command prompt changed to the following:
A:\>
This message may appear:
Not ready reading drive A
Abort, Retry, Fail?
If you see this message, the disk may not be inserted properly. Place the disk label-side
up in the disk drive, and make sure the disk clicks into the disk drive. Then, type r for
Retry. If this message appears again, press F for Fail, and then type b: at the command
prompt. If you no longer see this message, type b: instead of a: throughout the rest of the
tutorial.
There must be a floppy disk in the drive that you want to change to.
2. Change back to drive C by typing the following at the command prompt:
c:
Your command prompt should return to the following:
C:\FRUIT>
When you type a drive letter followed by a colon, you change to that drive. The drive
letter that appears in the command prompt shows which drive is the current drive. Unless
you specify otherwise, any commands you type are carried out on the current drive and in
the current directory.
So far, all the commands you typed were carried out on the current drive and in the
current directory. You can also carry out a command on a drive that isn't current. For
example, you can view the files on a disk in drive A without switching to drive A by
following this procedure.
o To view the contents of the WINDOWS directory on drive C
1. Type the following at the command prompt:
dir c:\windows
A list of the files in the DOS directory on drive C should scroll past on your screen.
Copying Files
This section describes how to copy a single file and a group of files. Copying files creates
a duplicate of the original file and does not remove the original file. This is useful for
many reasons. For example, if you want to work on a document at home, you can copy it
from your computer at work to a floppy disk and then take the floppy disk home.
To copy a file, you will use the copy command. When you use the copy command, you
must include two parameters. The first is the location and name of the file you want to
copy, or the source. The second is the location to which you want to copy the file, or the
destination. You separate the source and destination with a space. The copy command
follows this pattern:
copy source destination
• Copying a Single File
In this section, you will copy the notepad.exe files from the WINDOWS directory to the FRUIT
directory. You will specify the source and destination of these files in two different ways. The
difference between the two methods is explained at the end of this section.
Before you begin this section, make sure the command prompt looks like the following:
C:\FRUIT>
To copy the NOTEPAD.EXE files from the WINDOWS directory to the FRUIT directory
1. Return to the root directory by typing the following at the command prompt:
cd\
The command prompt should now look like the following:
C:\>
Change to the DOS directory by typing the following at the command prompt:
cd windows
The command prompt should now look like the following:
C:\WINDOWS>
2. Make sure the file you are going to copy, NOTEPAD.EXE, is located in the WINDOWS directory
by using the dir command followed by a filename.
dir notepad.exe
A list similar to the following appears:
3. To copy the NOTEPAD.EXE file from the WINDOWS directory to the FRUIT directory, type the
following at the command prompt:
copy c:\windows\notepad.exe c:\fruit
The following message appears:
1 file(s) copied
4. To confirm that you copied the files successfully, view the contents of the FRUIT directory by
typing the following at the command prompt:
dir \fruit
You should see the file listed in the FRUIT directory.
Renaming Files
This section explains how to rename files. You may want to rename a file if the information in it changes or
if you decide you prefer another name.
To rename a file, you will use the ren command. The ren command stands for "rename." When you use
the ren command, you must include two parameters.
The first is the file you want to rename, and the second is the new name for the file. You separate the two
names with a space. The ren command follows this pattern:
ren oldname newname
• Renaming a File
In this section, you will rename the README.TXT file.
Before you begin this section, make sure your command prompt looks like the following:
C:\FRUIT>
1. To rename the NOTEPAD.EXE file to PADNOTE.TXT, type the following at the command
prompt:
ren notpad.exe padnote.txt
2. To confirm that you renamed the file successfully, type the following at the command prompt:
dir
Deleting Files
This section explains how to delete, or remove, a file that you no longer want on your disk. If you don’t
have very much disk space, deleting files you no longer use is essential.
To delete a file, you will use the del command. The del command stands for "delete."
• Deleting a File
In this section, you will delete two files using the del command.
Before you begin, make sure your command prompt looks like the following:
C:\FRUIT>
To delete the PEARCOM and PEAR.HLP files
1. Delete the PADNOTE.TXT file by typing the following at the command prompt:
del PADNOTE.TXT
2. To confirm that you deleted the files successfully, type the following at the command prompt:
dir
• Deleting a Group of Files
In this section, you will use wildcards to delete a group of files.
Before you begin this section, make sure your command prompt looks like the following:
C:\FRUIT>
To delete files in the current directory that end with the extension OLD by using wildcards
1. View all files that end with the extension OLD by typing the following at the command prompt:
dir *.old
A list of all the files that end with the extension OLD appears. Make sure that these are the files
you want to delete. When you are deleting files by using wildcards, this step is very important. It
will prevent you from deleting files accidentally.
2. Delete all files ending with OLD by typing the following at the command prompt:
del *.old
3. To confirm that all the files with the extension OLD have been deleted, type the following at the
command prompt:
dir
The FRUIT directory should contain no files.
Now that the FRUIT directory is empty, you can delete it by using the rd (remove directory) command that
you learned to use in "Deleting a Directory" earlier in this chapter.
• To delete the FRUIT directory
1. Return to the root directory by typing the following at the command prompt:
cd \
2. You can see the FRUIT directory in the directory list by typing the following at the command
prompt:
dir or dir /p
3. Remove the FRUIT directory by typing the following at the command prompt:
rd fruit
4. To verify that the FRUIT directory has been removed, type the following at the command prompt:
dir or dir /p
The FRUIT directory should not appear in the directory list.
Tuesday, September 3, 2013
Subscribe to:
Posts (Atom)